TCML: 1,500 LB. Motorcycle Lift

Hydraulic Automotive Lifts: 24" Wide Motorcycle Lift Table

1-317-736-5094 or Toll Free at 1-888-736-5094
Garage & Shop Equipment
Save 10%!

Under New Ownership!

This site is under construction.
Pricing is NOT accurate.
Call us for current pricing.
Live Chat Support Software

Click Here For Complete Hydraulic Service!

Click here for onsite service

 Complete Hydraulic Car Lifts

Click Here For Financing Info!

Credit Cards Accepted


Join Our Mailing List!


Want to Save an Additional $100.00? Call Us And Ask How!

TCML Motorcycle Lift

Compressed Air Required


Motorcycle Lift

1,500 LB. Capacity

Pneumatic Motorcycle Lift Table

Retail Price: $1600.95 ONLY: $1299.95!

Product Overview Header

TCML Motorcycle Lift

The TCML is one of the most affordable, best packaged Motorcycle Lifts on the market today!

Complete Hydraulic's TCML Motorcycle Lifting Table comes with the following features: a Front Wheel Clamping Vise, a Drop Out Tail, a 3 Stage Adjustable Front Extension, a 20" long Drive-on Approach Ramp, and 1 FREE Service Jack.

You may find other Motorcycle Lifts that seem to compete with the TCML's price, but when you factor in getting all of the accessories that come included with the TCML, you will have to spend hundreds more to get a Motorcycle Lift that has features that match the TCML!

Below you will find much more information about this product, with details on all of the INCLUDED features that set this product above the rest: Details on the Power Unit & all other Featured Components; a full list of Specifications; a Photo Gallery with more pictures of this product; Shipping Information; Optional Accessories & Combo Packages available! See Below For More Info!


Back To Top Of Page

Photo Gallery Header

Back To Top Of Page

Features & Components Section Header

TCML Motorcycle Lift Table

Primary Features:

  1. All Inclusive Package: The TCML is a complete package lift
  2. Pneumatic operation: Air powered w/ foot pedal controls
  3. Service jack included: 1,000 LB. service jack designed for lifting motorcycles for wheel service, and with included adapters, will also lift ATVs & other small vehicles
  4. 7 position safety locking system: secures lift in place while working
  5. Single heavy duty pneumatic cylinder: Heavy-duty construction w/ sealed roller bearings for smooth operation
  6. Greasable shaft: Grease zerks on axle maintains smooth rolling action
  7. Detachable drive on ramp: Low angle ramp protects bikes as they are rolled onto and off of the lift
  8. Powder coated finish: Powder coat finish for durability w/ HD orange accents
  9. Compact portable design: Makes the TCML easy to move and store
  10. Front wheel vise: secures vehicles and includes adjustable front stop
  11. Drop out tail: Allows access to rear of vehicles and makes wheel service easier
  12. 3 stage adjustable front extension: Front chopper extension allows long bikes to fit onto the TCML
  13. Adjustable table lengths:: 84" - 97" - 110"

Back To Top Of Page

Specifications Section Header

Product Name:




Weight Capacity:

1,500 LBS.

Table Length w/ Approach Ramp:


Table Length w/OUT Approach Ramp:


Adjustable Front Extension:

84" (Table Alone)

97" (Stage 1 Ext.)

110" (Stage 2 Ext.)

Stage 1 Extended Length

w/ Approach Ramp:


Stage 1 Extended Length

w/OUT Approach Ramp:


Stage 2 Extended Length

w/ Approach Ramp:


Stage 2 Extended Length

w/OUT Approach Ramp:


Drop Out Tail Dimensions:

14" x 21"

Removable Approach Ramp Length:


TCML Table Width (w/OUT Extensions):


TCML Table Width (w/ OPTIONAL Extensions)


Safety Locking Positions (To Top Of Table):

19½", 21¾", 23½"

25", 27", 28½", 30"

Maximum Lifting Height (To Top Of Table):


Lowered Height (To Top Of Table):


Lifting Table Surface Area (w/OUT Extensions):

Table: 24" x 84"

Stage 1 Ext.: 24" x 97"

Stage 2 Ext.: 24" x 110"

Lifting Table Surface Area (w/ Extensions):

Table: 48" x 84"

Stage 1 Ext.: 48" x 97"

Stage 2 Ext.: 48" x 110"

Included Service Jack:

Max. Lifting Height: 15"

Lowered Height: 3½"

1,000 LB. Capacity

Air Requirements:

90 PSI

Shipping Weight (Aprox.):

500 LBS.

The specs above are for the TCML. Complete Hydraulic also offers a wide variety of other Motorcycle Lift. To see the other Motorcycle Lift we have available, and for product comparisons, click here.

Back To Top Of Page

Layout Drawing Header

Side View Specs Drawing:

Layout Drawing

Use this drawing to verify that you have adequate space for installing this lift in your installation bay.

Top-Down Specs Drawings:

Specs Drawing

See the Specification Charts above for drawings of this lifts dimensions. Use the link below for higher resolution copies of these files.

Download These Drawings As PDF


Back To Top Of Page

Optional Equipment Header

Optional Add-Ons:

TCML-RXLT Motorcycle Lift Extended Approach Ramp


Motorcycle Lift Extended Length Approach Ramp

Retail Price ONLY: $99.95 EA.


The TCML-RXLT is a replacement accessory for the TCML & TCMLW standard Approach Ramp. This replacement ramp is 35" long and dramatically reduces the angle of the ramp for longer motorcycles and choppers MORE INFO.

Ships UPS Ground!


More Info

TCML-RA Motorcycle Lift Roller Assembly


Motorcycle Drop Tail Removable Flat Plate

Retail Price ONLY: $19.95 EA.


The TCML-RFP is a replacement accessory for the TCML & TCMLW standard Drop-Out Tail. MORE INFO.

Ships UPS Ground!


More Info

TCML-SJ Motorcycle Lift Service Jack


Motorcycle Service Jack

Capacity: 1,000 LBS.

Retail Price: $99.95 ONLY: $89.95 EA.


The TCML-SJ is a lightweight scissor jack designed to fit most motorcycle and ATV frames. The TCML-SJ will work with any motorcycle lift table, or from the floor. MORE INFO.

Ships UPS Ground!


More Info

TCML-SE Motorcycle Lift Side Extensions


Motorcycle Lift Side Extensions

Retail Price: $174.95


The TCML-SE is a width extension kit designed for the TCML motorcycle lift. The kit includes a 12" side extension for each side of the lift, approach ramp width extensions, and all necessary connectors & hardware. This kit can be used to quickly add 24" width to the TCML lift table! MORE INFO.

Ships UPS Ground!


More Info

Shipping Information Header

Product Packaging

Packaging Details:

This is a picture of how your TCML will be shipped to you. Please read the Shipping Details section below for more information about our shipping procedures!

Shipping Method:

Freight (LTL) Ships via Freight!

Shipping Length:


Shipping Height:


Shipping Width:


Shipping Weight:

500 LBS.

The TCML Motorcycle Lift's weight is just under 500 LBS. If you have any questions regarding shipping procedures or would like more information on this equipment, PLEASE CALL US AT 1-888-736-5094!

Motorcycle Lift Shipping Info:

This product will be shipped by common carrier. For more information about how this item will be shipped to you, it is always best if you call us at 1-888-736-5094 to get a shipping quote and review Complete Hydraulic's shipping procedure for this Motorcycle Lift with one of our sales associates.

It is vital for the customer to understand what is required of them for receiving these shipments! If you have ANY questions about shipping policies or procedures, please see detailed information here or call us at 1-888-736-5094 and one of our friendly sales associates will be happy to help you!

Destination Requirements & Unloading Equipment:

For residential deliveries, the customers address must be able to accommodate a large 18 wheel truck pulling into and out of the drive. THE CUSTOMER IS RESPONSIBLE FOR UNLOADING THE PRODUCT FROM THE TRUCK!* Liftgates are available. Residential charges may apply. PLEASE NOTE: Truck companies may place a reasonable time limit on how long customers are allowed to take before charging extra fees - please ensure you are prepared & ready to unload your equipment when the truck arrives.

Due to the size of this equipment, customers MUST have a Forklift, wrecker boom or similar piece of equipment to unload their product from the truck. If you are unsure about unloading this equipment from the truck, do not have the space available for a semi tractor w/ a 53 ft trailer, or do not have the necessary equipment for unloading the product(s) from the truck, we STRONGLY recommend having the equipment delivered to a business address* with a dock that is equipped to unload large trucks.

*For customers unable to accommodate a large truck at their residential address and have no business address available, we STRONGLY urge them to have their product shipped to a local trucking terminal. The terminal staff will be able to unload the equipment from the truck and onto a truck or flatbed trailer for you at no additional cost, and then you will be able to unload the equipment with no time constraints.

Indiana Sales Tax:

Indiana residents must add sales tax of 7% to your final cost. If any equipment is picked up at Complete Hydraulic, the customer must pay the 7% Indiana sales tax*

* Unless the customer is tax exempt - A TAX EXEMPT FORM MUST BE PROVIDED!

Other Shipping Policies:

For more thorough overview of CHSSI's shipping policies, click here.


Ask About our Low Freight Rates!


Again, should you have any questions regarding shipping procedures or would like more information on this product, PLEASE FEEL FREE TO CALL US AT 1-888-736-5094! Thank you!


Back To Top Of Page

Warranty Information Header


The TCML comes with a 1 Year Limited Warranty.

Complete Hydraulic has a team of technical experts who will be able to trouble shoot any problems you may have and give you the help you need to get your product back up and running ASAP!

We stock a large inventory of parts for all of our equipment at our Franklin facility. From the smallest fittings and bolts, to the largest components like Carriages, Runways, Lifting Arms, Columns and much more! We are stocked and committed to keep you up and running.

Our Service Department is not limited to people who sit at desks and answer calls. We have a full staff of experienced technicians that work in our huge service & machine shop, repairing & fabricating hydraulic components from & for every manufacturer in the industry. In fact, Complete Hydraulic is no stranger to our competition's frustrated customers bringing their equipment here so that our Repair Technicians can get the competition's failed equipment back up and running!

With our hands on knowledge of hydraulic and garage equipment, our staff is waiting to assist you with any problems you might run into with this product, or any hydraulic equipment!

Back To Top Of Page

Bottom Border



Home | About Us | Contact Info. | FAQ

Complete Hydraulic Service & Sales, Your #1 Hydraulic Source!

Complete Hydraulic
Service & Sales, Inc.

1-317-736-5094 Office
1-888-736-5094 Toll Free
1-317-738-0555 Fax

Mon-Fri 8am - 5pm (Eastern)

130 Commerce Park Dr.
Franklin, IN 46131