The Bend-Pak Blue Bullet Pipe Bender
A Pipe Bender that delivers superior performance at a highly competitive price!
The Blue Bullet is Bend Pak's 1302 frame equipped with a simple knee valve and degree plate combination. Made for excellent performance and affordability, the Blue Bullet is the answer to most shop's pipe bending needs!
The Blue Bullet:
- Leg-operated control lever at front keeps hands free
- Two separate end finishing unites at rear for all necessary flaring and expanding
- Degree plate located up front for easy viewing
- Comes complete with quick release bending and end finishing dies
- Includes high-speed clampless swager and internal expander
- 3-inch bending capacity: B-1 Die Package
- Energy efficient 5-H.P. motor
- Filtered hydraulic system
- Solid steel heat-treated tooling
- Updated computer card system available for
all necessary
bend data for automobiles and
light trucks dating back to 1960
Hands Free Bending
A knee operated valve gives you precise control and hands free bending capability with the convenience of trouble-free operation. Simply push the lever to the left to advance the bending die then to the right to retract it. Heavy-duty cast iron construction means the valve will stand up to years of heavy use.
Depth of Bend Degree Plate
An easy to read degree plate located right up front gives you accurate depth-of-bend readings for bends up to 180 degrees. The oversized pointer takes the guesswork out and makes bending fast and efficient. The numbers are acid etched into the aluminum indicator plate — you don`t have to worry about wiping them off with oil.
Blue Bullet Bender Specifications: |
| Bending capacity: |
Tubing from 1/2" O.D. - 3" O.D. |
| Maximum capacity: |
3" tubing |
Maximum bending radius:
|
5" |
| Minimum bending radius (*): |
3-1/2" |
| Swaging capability (**): |
Expansion / Reduction / Forming |
| Swaging Capacity: |
1" O.D. tubing - 3" O.D. tubing |
| Motor: |
5 H.P. / Single or three phase 220, 380 or 440 volts |
| Pump output: |
3-GPM / 4200 p.s.i. (maximum output) |
| Operation modes: |
Manual Knee Control |
| Hydraulic filter: |
Canister type |
| Bending force: |
60,000 pounds maximum |
| Bend-depth control: |
Manual Bend-Depth Gauge |
| Overall length: |
62" |
| Overall width: |
30" |
| Overall height: |
41" |
(*) Special radius dies are available. (**) Reducing tools do not come standard. |
2 Blue Bullet Configurations Available:
B-1 Tooling Package
B-2 Tooling Package
*The Blue Bullet Pipe Benders are availble in two models
depending on which tooling package fits your needs.
